hi,
i am using instant clones (horizon 7.6), i have an web app on instant clone desktops (windows 7),
users are facing pop-up as attached screenshots. these are not being saved with user profile eventhough java and IE profiles are created on UEM.
anyone knows where such checkboxes/warning are saved?
hi,
can we control when users can access their desktop pools?
for example, no one is allowed to access his desktop pool after 6:00 PM
Используется bladeTecalE6000 Huawey. Один виртуальный свитч vmnic0 используется под ЛВС (vlan100), второй vmnic1 - под другие vlan (232, 237). Устройства подключены к коммутатору Cisco 3750. Конфигурация портов маршрутизатора:
interface
GigabitEthernet2/0/12
description blade-HUAWEY
switchport access vlan 100
switchport mode access
spanning-tree portfast
!
Второе
interface
GigabitEthernet1/0/2
description "Trunk Huawei switch A2"
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 232,237
switchport mode trunk
spanning-tree portfast trunk
!
На vmnic1 созданы VmkernelPort vlan232, адрес 10.х.232.64 и VirtualMachinePortGroup Lan232 (к нему подключена одна виртуальная машина, адрес 10.х.232.65 ). С vm пингуется vmkernelport, а вот дальше свитча уже ничего не видно. Кроме того не поступает mac ни от vm, ни от свитча vmnic1 на маршрутизатор.
There seems to be nowhere to send alt-printscreen, used in Windows to capture an application window to the clipboard as an image.
Does anyone know how to do this?
Hello,
I'm running a VM (Linux CentOS 6.6) on a ZBook PC host (CentOS 6.5) with VMware Workstation 12 Pro.
The VM has a eth0 interface, connected with the NAT network of VMware (vmnet8 interface of the host).
When I start the PC and run the VM : the eth0 interface of the VM remains 'DOWN', with 'ADDRCONF (NETDEV_UP): eth0: link is not ready' in /var/log/messages of the VM.
When I connect the PC host to the internet (ethernet or wifi), the eth0 interface of the VM changes to 'UP', with :
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
in /var/log/messages.
Even when I disconnect the PC host connection, the interface remains 'UP', till I reboot the PC host.
Is there any way to have the eth0 UP at VM startup, independantly of the PC host connexion ?
Thank you for your help,
Vincent
Hi,
Our provider uses EMC's VPlex product between the storage and the ESXi hosts. Unfortunately this doesn't support the flag that VMware uses to query for SSD and as a result the LUNs can toggle between SSD and Non-SSD. After a *lot* of "discussion" I managed to impress on them that this is more than a cosmetic issue - as the VMs see this change as well as the ESXi hosts !
Now they have agreed I can get them to use ESXi commands to hard set the presented storage to always be non-ssd.
I have found KB article -VMware Knowledge Base 2013188 which explains enabling SSD (and by inference how to do the reverse) and also have the documentation.
The KB article says I need to power off all the VMs, unmount the disks/LUNS and reboot the ESXi hosts for the change. This article also talks about marking the disk as local whereas all my disk is shared amonst the cluster nodes.
The documentation doesn't mention powering off the VMs / unmounting / rebooting for the enabling SSD and reclaim. It DOES mention this on the separate page/process for marking the storage as local though.
Naturally I was hoping to do this with one rule based on vendor and model, but it looks like that would be an outage of EVERYTHING to achieve it if the KB article is correct ?
Has anyone performed JUST the change from enable_ssd > disabled_ssd or vice versa to an online system (i.e. not marked storage as local at the same time) ?
Yes, I intend on asking support, but also would love to know if anyone has done this.
Cheers
Ian
Good evening everyone,
I’m about to make a purchase but I have my doubts.
My Dell OptiPlex 7050 MINI only has one NIC and would like to have more since my home lab is growing. The only remaining option I have is to get myself a fancy M.2 NIC with two ports. It was hell to find but found something; Innodisk EGPL-G202.
I send an email to the sales department from dpie.com and got the following reply; “They use Intel i210 controllers. Innodisk only supports Windows and Linux I’m afraid. Other operating systems should work but if any problems arise, support would be somewhat limited.”
So, what do you guys think, would it work? C:
Ellen.
Hi,
I'm trying to install NSX 6.4.0 in our test lab and when I'm trying to deploy the first NSX controller it fails in the vCenter Tasks and Events with the message: Operation timed out.
The log inside Networking & Security states the following:
And by looking at the log inside NSX Manager the first error in a long range of java exceptions is this one:
2018-05-02 16:04:46.479 CEST ERROR pool-45-thread-1 ResourcePoolVcOperationsImpl:196 - - [nsxv@6876 comp="nsx-manager" subcomp="manager"] Error while pushing file '/common/em/components/vdn/controller/ovf/nsx-controller-6.4.0-build7552024-system.vmdk'. java.net.ConnectException: Connection timed out (Connection timed out) at java.net.PlainSocketImpl.socketConnect(Native Method) ~[?:1.8.0_151] at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:350) ~[?:1.8.0_151]
After this point there's a full range of java related garbage messages that continues for ~5 minutes before it gives up.
It seems that the error message Error while pushing file '/common/em/components/vdn/controller/ovf/nsx-controller-6.4.0-build7552024-system.vmdk'. is quite important here, but I haven't found any solutions yet. So far I've reviewed different kb articles (VMware Knowledge Base, VMware Knowledge Base) that used to be valid for 6.3.x, but it seems that the problem is different on 6.4.0.
DNS is setup correctly (VMware Knowledge Base ) and time is synced on all levels so I'm wondering if anyone has seen anything like this before. This is a totally clean environment that was just recently installed from scratch.
Lars
I have a vCenter environment, the vCenter server and PSC is separate deployment.
I have two vCenter Server and a PSC in the environment.
I add a new PSC to the vCenter environment.
Two PSC in the same site.
I repont a vCenter server to the new PSC, But show a error.
Dears,
I would like to set an Alarm if someone removed a VM, however I am not able to set the triggered alarm VM being removed or VM deleted as it does not exist.
anyone faced a similar problem?
on other note: How do I set an alarm for a event regarding: Device naa.00000xxx0x0xx0xx0x performance has deteriorated. I/O Latency increased .....?
thanks!
the steps as follows:
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
an error occured when I start the virtual machine,what's wrong with my process?
I am having problems with Vcenter. I am getting "503 Service Unavailable (Failed to connect to endpoint: [N7Vmacore4Http20NamedPipeServiceSpecE: 0x0000562aca3f19b0] _serverNamespace = / action = Allow _pipeName = / var / run / vmware / vpxd-webserver-pipe)" when I connect via https.
I did some troubleshooting and narrowed down the issue to postgresql does not come up.
root @ photon-machine [~] # service-control - status
StartPending:
vmware-vpxd-svcs
Running:
applmgmt lwsmd vmafdd vmcad vmdird vmdnsd vmonapi vmware-cis-license vmware-cm vmware-eam vmware-psc-client vmware-rhttpproxy vmware-sca vmware-statsmonitor vmware-sts-idmd vmware-stsd vmware-vapi-endpoint vmware-vmon vsphere- client vsphere-ui
Stopped:
pschealth vmcam vmware-content-library vmware-imagebuilder vmware-mbcs vmware-netdumper vmware-perfcharts vmware-rbd-watchdog vmware-sps vmware-updatemgr vmware-vcha vmware-vpostgres vmware-vpxd vmware-vsan-health vmware-vsm
root @ photon-machine [~] # more / var / log / vmware / vpostgres / serverlog
LOG: syntax error in file "/storage/db/vpostgres/health_status_worker.conf" line 1, near token ""
LOG: skipping missing configuration file "/storage/db/vpostgres/postgresql.conf.repl"
FATAL: configuration file "/storage/db/vpostgres/postgresql.conf" contains errors
I am using the vcenter to manage NSX and do not want to rebuild the complete environment from scratch.
Hello,
i'm trying to setup a nested lab on 2 physical host with ESXi 6.7 U1 installed. I've configured DVS and a dpg dedicated to Nested ESXi hosts.
To enable MAC learning for the specific dpg i've followed (thanks William):
Checking if it's enabled:
PS C:\Users\Administrator.LAB> Get-MacLearn -DVPortgroupName @("vds01 - vESXi-Trunk")
DVPortgroup : vds01 - vESXi-Trunk
MacLearning : True
NewAllowPromiscuous : False
NewForgedTransmits : True
NewMacChanges : False
Limit : 4096
LimitPolicy : DROP
LegacyAllowPromiscuous : True
LegacyForgedTransmits : True
LegacyMacChanges : False
Seems good.
But if i try to test network performances (first on the same physical host) i see quite poor results:
iperf client:
[root@m-esxi01:/usr/lib/vmware/vsan/bin] ./iperf3 -i -t300 -c 172.28.101.2 -fm
Connecting to host 172.28.101.2, port 5201
[ 4] local 172.28.101.1 port 59316 connected to 172.28.101.2 port 5201
iperf3: getsockopt - Function not implemented
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-10.00 sec 2.02 GBytes 1738 Mbits/sec 0 0.00 Bytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 2.02 GBytes 1738 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 2.02 GBytes 1738 Mbits/sec receiver
iperf Done.
[root@m-esxi01:/usr/lib/vmware/vsan/bin]
iperf server:
[root@m-esxi02:/usr/lib/vmware/vsan/bin] ./iperf3.copy -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 172.28.101.1, port 44099
[ 5] local 172.28.101.2 port 5201 connected to 172.28.101.1 port 59316
iperf3: getsockopt - Function not implemented
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 232 MBytes 1.94 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 1.00-2.00 sec 183 MBytes 1.54 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 2.00-3.00 sec 208 MBytes 1.75 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 3.00-4.00 sec 212 MBytes 1.78 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 4.00-5.00 sec 198 MBytes 1.66 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 5.00-6.00 sec 203 MBytes 1.71 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 6.00-7.00 sec 199 MBytes 1.67 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 7.00-8.00 sec 200 MBytes 1.67 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 8.00-9.00 sec 217 MBytes 1.82 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 9.00-10.00 sec 197 MBytes 1.65 Gbits/sec
iperf3: getsockopt - Function not implemented
[ 5] 10.00-10.10 sec 23.0 MBytes 1.92 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.10 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.10 sec 2.02 GBytes 1.72 Gbits/sec receiver
-----------------------------------------------------------
Is that a "normal" results for nested environments? If not, what can i check to improve performances?
Thanks, kind regards,
Nicola
I am trying to install VMware-vSphere-CLI-6.7.0-8156551, and the installer fails with this at the end:
Please wait while copying vSphere CLI files...
The file /lib/libgcc_s.so.1 that this program was about to install already
exists. Overwrite? [yes] no
The file /lib/libz.so.1 that this program was about to install already exists.
Overwrite? [yes] no
Unable to get the access rights of source file "./lib/5.10/Socket6-0.23-rhel6".
Execution aborted.
# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.6 (Maipo)
Any help?
This is very bizarre. I have a single ESXi server running ESXi 6.5 with no vCenter and PowerCLI 6.5 Release 1.
I have a folder called C:\updates on my local laptop. The folder looks like the following:
c:\updates
subfolder1
specialVib.vib
subfolder2
specialVib2.vib
subfolder3 etc
ESXi65....zip
So I need to copy a mix of folders and files up to a datastore. The code roughly looks like the following:
$datastoreObj = get-datatstore -Name "myDatastore"
$psDrive = new-psDrive -Location $datastoreObj -name tmpPsDrive -PSProvider VimDatastore -Root '\'
$src = "c:\updates"
Copy-DatastoreItem -Item $src -destination "tmpPsDrive:\Updates"
It seemed to work once, but during the course of testing other things it stops working.
Now when I run it, the datastore contains 2 folders:
2fUpdates # this folder is correct and has all my content
Updates # this folder only contains subfolders and zero files
It is suspicious to me that "2F" is the hex value for the ascii char "\"
I feel like I may have an incorrect "\" in there somewhere, but nothing I've tried seems to work.
All my internet searches seem to show copying a single file, but the cmdlet reference has an example to
copy a folder.
Any suggestions/thoughts?
I am ridiculously close to deleting the incomplete datastore and renaming the 2f one - ugh.
Maureen
Every time the ESXi server is rebooted, it appears that it resets all of the permission sets to default. This includes users, or roles, that are created through the web interface or using esxcli.
For instance, if I create a user named test and assign it the administrator role, it works until the machine is rebooted. After reboot, a check of the permissions shows that root is once again the only user assigned to this role. While the Administrator role is used as an example here, it also applies to user defined roles as well.
Any ideas?
Hi,
I'm trying to upgrade my vcsa from 6.5U2c (6.5.0.23100) to 6.7U1 but the pre-upgrade checks always fail.
The error I get is "Cannot validate target appliance configuration as not enough information from the source appliance can be collected. For more details check out the server logs"
I have tried deleting the new appliance and restarting the upgrade process and I have found this previous thread but that didn't help in my case.
This appliance was upgraded previously from 5.5 rather than being a fresh install.
I have attached the logs which I hope will provide some clues.
I'm just not sure where to look next
Sorry,I am not good at English,but I have a few questions when I try to create a VM use IPV6 address.
first : I using the vmware SDK to create a Linux system VM,use IPV6 adress,I found if I set a IPV6 address,then mush set a IPV4 adress
second : when I create a windows VM,use IPV6 adress,also must set a IPV4 adress, bug when I login system，Check network settings，I found the IPV4 setting do not have any adress and IPV6 setting have custom setting IP.when I use ipconfig command view IP setting,the result have a auto IPV4 address,a auto IPV6 address and custom IPV6 address
Sorry ,because my English is not good at ,I am not very sure my question clearly expressed? but ,I want get a answer,THANKS.
行き詰ってしまいましたので皆様のお知恵をお貸しください。
vCenterのアラーム定義を自動で設定する方法を調査しているのですが、
アラームの新規登録の方法が見つからず、手詰まりとなってしまいました。
PowerCLIのコマンドを確認したのですが、AlarmActionやAlarmActionTriggerを追加するコマンドはあったのですが、
アラームそのものを追加するコマンドが見当たりませんでした。
確認したPowerCLIのバージョンは11.0.0です
特にスクリプトにこだわりがあるわけでは無いので、GUIからインポートが出来る方法があるなどの情報でも大歓迎です。
逆に「出来ない」という事であれば、それも諦めがつきます。
以上、宜しくお願いします。
Author : Alyc Helms
Topic Name : Resolving SAN Storage Display Problems
Publication Name : vSphere Troubleshooting
Product/Version : VMware vSphere/6.5
Question :
Errors: sxcli storage core adapter rescan --all Error while rescanning adapter vmhba2. Error was Unable to scan VMkernel SCSI subsystem for old devices. Scan already in progress Error while rescanning adapter vmhba3. Error was Unable to scan VMkernel SCSI subsystem for old devices. Scan already in progress