Hello to everyone.

I have a problem with my ESXI server. I am getting purple screen of death on my host. If anyone can help I will be very grateful. I am beginner in VMware software so any help is appreciated.

Below I will explain my problem.

I built a computer myself with the following parts:

1)        1) Motherboard -  ASRock 970 EXTREME4 AM3+

2)      CPU- AMD FX-8150 Zambezi 3.6GHz Socket AM3+

3)        3)  RAM-  Kingston 8GB 240-Pin DDR3 SDRAM DDR3 1333 x2= total 16GB

4)      HDD – First is Samsung F1 1TB 7200

             Second is – Seagate Barracuda 1TB 7200

5)      Video card- ASUS ENGT430/DI/1GD3(LP) GeForce GT 430 (Fermi) 1GB 128-bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Ready Video Card

6)      NIC card- Intel EXPI9301CTBLK Network Adapter 10/ 100/ 1000Mbps PCI-Express 1 x RJ45

7)      Wi-Fi router is NETGEAR N600 Gigabit router WNDR3700v4

8)      PSU is Thermaltake 450W

So at first I installed ESXI 5.1 and everything was good until I created VMs. When I turn on VM after some time I get purple screen of death (attached below). I read this forum and tried a lot of stuff but nothing helped. Yesterday I decided to try ESXI 5.0 update1 but got purple screen again. I installed only 1 VM for test.  I checked my Ram with memtest and it is good, no errors. Hard drives are also checked no errors. The only thing I didn’t check is Video card, so I don’t know if it can be the reason.  I upgraded Bios on motherboard to latest. I turned on AMD-v and IOMMU in Bios.

Below are the screenshots of my errors, please let me know what to do in order to find a problem.

Thank you.