Hi I have an issue with Office 365 Outlook 2016 displaying a strange error which stops us from using outlook.

The error is "The time limit for logging on was reached while waiting for system resources. Try again Mapi 1.0 [000004C2]

Microsoft have acknowledged this as a potential fault with an add-in we do not use. https://support.microsoft.com/en-hk/help/3181206/outlook-2016-error-the-time-limit-for-logging-on-was-reached-while-wai

We cant launch the app settings and need to restore using "UEM Self Service" this is stopping us from rolling out windows 10 to our departments.

Environment

Office 2016 O365 16.0.4849

Windows 10 1803

App Vols 2.14

UEM 9.6

Instant clone desktops with local uem profiles (not using mandatory)

We have appstacks and writeables in place. We are using Office 365 exchange.

When we restore the settings and logoff and back on the OST file continues to be used. I do not think this is a corruption error on the OST part.

We are using the UEM Office 2016 settings obtained through the VMware uem community site. Just wondering if anyone has any tips on how to rule out the gold image, uem, or appvols.

IT does not happen every time but usually after about 5 or 6 logins.

IncludeRegistryTrees]

HKCU\Software\Microsoft\Office\16.0\MAPI

HKCU\Software\Microsoft\Office\16.0\Outlook

HKCU\Software\Microsoft\Office\Outlook

HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles

[IncludeIndividualRegistryValues]

HKCU\Software\Microsoft\Exchange\Client\Options\PickLogonProfile

IncludeFolderTrees]

<AppData>\Microsoft\Outlook

<AppData>\Microsoft\Signatures

[IncludeFiles]

<LocalAppData>\Microsoft\Office\olkaddritem.officeUI

<LocalAppData>\Microsoft\Office\olkapptitem.officeUI

<LocalAppData>\Microsoft\Office\olkdlstitem.officeUI

<LocalAppData>\Microsoft\Office\olkexplorer.officeUI

<LocalAppData>\Microsoft\Office\olklogitem.officeUI

<LocalAppData>\Microsoft\Office\olkmailitem.officeUI

<LocalAppData>\Microsoft\Office\olkmailread.officeUI

<LocalAppData>\Microsoft\Office\olkmmsedit.officeUI

<LocalAppData>\Microsoft\Office\olkmmsread.officeUI

<LocalAppData>\Microsoft\Office\olkmreqread.officeUI

<LocalAppData>\Microsoft\Office\olkmreqsend.officeUI

<LocalAppData>\Microsoft\Office\olkpostitem.officeUI

<LocalAppData>\Microsoft\Office\olkpostread.officeUI

<LocalAppData>\Microsoft\Office\olkreportitem.officeUI

<LocalAppData>\Microsoft\Office\olkresenditem.officeUI

<LocalAppData>\Microsoft\Office\olkrespcounter.officeUI

<LocalAppData>\Microsoft\Office\olkresponseread.officeUI

<LocalAppData>\Microsoft\Office\olkresponsesend.officeUI

<LocalAppData>\Microsoft\Office\olkrssitem.officeUI

<LocalAppData>\Microsoft\Office\olkshareitem.officeUI

<LocalAppData>\Microsoft\Office\olkshareread.officeUI

<LocalAppData>\Microsoft\Office\olksmsedit.officeUI

<LocalAppData>\Microsoft\Office\olksmsread.officeUI

<LocalAppData>\Microsoft\Office\olktaskitem.officeUI

I have a Dell POWEREDGE R520 with a 64GB PNY USB drive that I am trying to install ESXi onto. I tried the VMware image and Dell EMC customized image. After selecting the drive to install ESXi onto, it starts the install and almost fails instantly with the following error. Before beginning installation I cleaned the USB drive with DISKPART to remove all partitions.

Hello, I got a problem after upgrade to Windows Insider Preview 1903 18362.30 x64 on host machine.

CPU : I5-8400

RAM : 16G

Host OS : Windows 10 1903 x64 18362.30 (Latest WIP)

VMWare Version : 15.0.4 build-12990004

Other Status :

"bcdedit /set hypervisorlaunchtype OFF"  (Means that Windows Native hypervisor already turned off)

"Memory integrity guard OFF"

"Credential Guard OFF"

Before I upgraded to Windows Insider Preview 18362.30, I was using Windows 10 RS5 x64 as a host operating system.

I could run any VM guest machine without any problem.

But, after I upgrade to Windows 10 1903, I cannot run any VM guest.

Guest screen only shows a black screen, and nothing happens.

What I can do is just rebooting machine. Cannot terminate vmware-vmx.exe process.

Anybody has same issue like this? And if anybody has solution it will be very thankful.

Thanks.

Hi Luc,

if you can suggest how i can run orange line in background and not shown in console .as this can cause overwhelming display of vm partitions which is not desired .

all i want to display is green light .

also i found that freespacepercent is not the direct properties in most of the commands in datastore and disk partitions which i think should be incorporated in future release of powercli.

foreach($v in (get-vm -Location cluster1|?{$_.Guest.GuestFamily -eq 'windowsguest'}))

  {

  $vm=get-vm -name $v

  #$vm.guest.Disks

  #cls

  $paths=$vm.guest.Disks

  foreach($p in $paths)

  {

  $partition_freespace_percent=$p.freespacegb/$p.capacityGB*100

  $partition_freespace_percent_round=[math]::Round($partition_freespace_percent)

  #$partition_freespace_percent_round

  $p|select @{N='vmname';E={$vm.name}},@{N='partition';E={$p.Path}},@{N='freespacepercent';E={$partition_freespace_percent_round}}

  if($partition_freespace_percent_round -le 10)

  {

write-host "check free space percentage on" $p.path "on" $vm.name -ForegroundColor red

  }

  }}

Hi Everyone,

We had a requirement wherein we needed a custom appstack template of size 60GB.

We had a Windows Server 2012 R2 machine which we used to create the custom appstack template of size 60GB using the 20 GB default template.

Once all done with the creation of new template, we started the capture using 60GB template.

While installing the app , msi installer says error 2755 unable to detect the file. Then I ended this failed capture session and disconnected the appstack.

Once again I tried to install application but this time on OS directly, then no such errors were reported.

Then I tried to connect the good old 20GB template and tried a capture, even then I get the same error.

Anyone came across such scenario , Please suggest.

Hello Guy,

When i deploy a new Ubuntu VM on vSphere client, I face the problem nano ~/.vnc/xstartup command not edit the file. while I followed all the commands

1. Install VNC server: apt install vnc4server xfce4 xfce4-goodies

2. set a password for VNC using vncpasswd.

3. Start VNC with the command vncserver to create the xstartup script.

4. Open the xstartup file using nano editor: nano ~/.vnc/xstartup

5. Install Gnome and utilities using the following command:

apt install gnome-settings-daemon metacity nautilus gnome-terminal

6. kill VNC process and restart

Good morning everyone!

I know there´re many threads with this topic but i couldnt find a answer for my question.

We´ve got a VCSA vCenter with 7 hosts.

I need to change the certificate from the VCSA (cause of an audit... if we connect to the vCenter there shouldnt be a waring because of the VM certificate)

If´ve read a lot of How-To´s and things like (VMware Knowledge Base) but there´s one question (or maybe 2 )

If I replace the Machine certificate from the VCSA (Option 1 @ Certificate-manager) do I need to change the certificates for the ESXi Hosts too?

Maybe you guys could assist

kind regards from austria

Philipp

Hello,

In one of my protection group, there is a VM in not configured state. I tried to configure it but it pops out an error message saying the connection to the remote server is down cause operation timed out 300 second.

Any idea how to resolve this? I've attached the screenshot of error message.

Thank you

Is that necessary add hosts to oneview as a manage for run proactiveHA or need add as monitor for run proactiveHA?

BR

Babak

Is it possible to recover deleted datastores?

I made the mistake of attempting to copy datastores to different locations and deleted the original(s). The copies showed successful but they weren't...I've been able to successfully use file recovery with Linux, however, it would be great if I could mount the datastores and copy the vmdk files.

Does anyone have any ideas I can try?

VMware Workstation 15 Player

Windows 10 host 1920X1080, Windows 98 SE Korean guest 1024X768

I added this line in preferences.ini

pref.autoFitFullScreen = "fitHostToGuest"

then at full screen mode I got upscaling. But like this

What could I try to correct this?

Is this VMware's intention? Or is it possible by tweaking preferences.ini, vmx file or config.ini?

Any helps appreciated.

added. Korean 103/106 keyboard not supported. can't change English to Korean (or vice versa). 14 Player with VMware tools an year ago didn't show this problem.

added. guest 640X480 full screen mode display

svga.maxWidth = "1024"     svga.maxHeight = "768"     svga.vramSize = "3145728"

changing these options in windows 98.vmx has no effect, have nothing with my problem.

pref.autoFit, pref.autoFitGuestToWindow lines in preferences.ini are not full screen option.

I guess full screen display field is forced to always follow guest resolution, so if I can fix that vmplayer full screen display field resolution to 1920X1080 (host resolution), this will be solved. but I don't know how.

This is all about vmplayer full screen mode configuration, not guest, I guess.

If this parameter is hidden hard (because of Pro version), I will quit and give up answer. So I want to know VMware's stance.

Or I hope someday they sell less expensive Workstation version with scaling function. Pro's too expensive to buy, just for 90s gaming nostalgia.

I know line pref.vmplayer.fullscreen.nobar = "TRUE"  , so this scaling problem is only left to use Player comfortably.

added. this message was in Workstation Pro group board 3 days. I didn't know this Player group board. It's my mistake.

I hope any response related. For 3 days there was none.

Hello

Just installed a fresh HP DL380 Gen10 with VMware ESXi 6.5 (6.5.0 Update 2 (Build 8294253) from HPE-ESXi-6.5.0-Update2-iso-Gen9plus-650.U2.10.3.0.24 (Hewlett Packard Enterprise)). Installed a Windows Server 2016 Standard virtual machine, but ESXi kills the VM after running for about 5 minutes. After ESXi killed the VM, I can't power it on anymore.

This appears in the event log of the virtual machine:

Issue detected for vm1-server2016 on esxi1 in ha-datacenter: Configuration file has unexpected changes. Virtual machine has been terminated. Unregister and re-register virtual machine if the configuration file is correct.

I have tried unregistering and re-registering but ESXi keeps doing the same...

Thanks,

Hi everyone,

This question may be trivial, but as a new user to vmware, I have no clue about it.

The point is the following: we have 4 PCs at home, and instead of renewing all of them, I would like to build a multihead system running ESXI in order to vitualize 4 vms, one for each PC we actually have. Each vm will have a head consisting of a dedicated monitor (with GPU passthrough) and USB hub (for connecting mouse and keyboard), and each head will be in a different room. And because of this, it is a requirement that I can start a vm from the heads; this is, with just the keyboard and mouse.

My concern is: is it possible to do that, or do I need to interact with the server through vmware Sphere client -or something alike- if I want to power up a vm?

As I said, I have no experience with ESXI. I do plan on installing it in a spare computer and trying everything I've mentioned, but I haven't done it yet. So any help would be much appreciated.

Best regards

I'm using ESXi 6.7 free and am running several Server 2012R2 VMs (VM version 14).  I wanted to "in place" upgrade to 2019 but it kept hanging (Hard lockup) after the initial reboot.

Every time it failed, it would hang on the reboot (windows logo screen with spinning dots). I could not power off the VM.  I would even try to esxcli vm process -kill the world id and it would disappear from the process list but it would still never go down.  I had to end up rebooting the ESXi host (shutting down all my VMs) every time it failed, a more than 15 minute experience each time.

Each time after I booted up the VM again, it show a setup failed message with a generic error code that searching the internet for turned up "it could be anything" type of posts.

After days of trying different things, as in uninstalling drivers, VM Tools, stopping start-up services from running, trying different versions of the 2019 install media, etc, as a last resort I went down the list of controllers on my hard drives.  First going from LSI SAS to paravirtual, and then to SATA.  Once I changed the hard drives to SATA and uninstalled the other SCSI controllers the upgrade process finished fine.

Just an FYI if anyone else runs into this.

Should I change my hard drives back to paravirtual SCSI controllers or just leave them on SATA?

Edit: I forgot to mention that I am running DellEMC-ESXi-6.7.0-8169922 specific image of ESXi.

Background: We're looking to migrate from Foreman+vSphere to vRA+vSphere. I've taken the vRA install and config and the vRO course.

Test lab is a clean install of vSphere Client version 6.7.0.30000, VMware ESXi, 6.7.0, 8169922 and vRA 7.5.

After initial install I've attempted to run the vSphere Initial setup within vRA catalog and ran into some problems. I found that vSphere 6.5 systems needs to have the vCenter plugin updated (vRO vCenter plug-in  for vSphere 6.5 service releases ) which I did. After that it did progress further but now I am seeing the following error. I'm hoping someone with more experience might have some insight as to what might be the cause because my google-fu isn't turning anything up.

[2019-05-29 15:30:45.052] [I] ********************************************************

[2019-05-29 15:30:45.054] [I] Validate endpoint connection settings

[2019-05-29 15:30:45.059] [I] ********************************************************

[2019-05-29 15:30:45.098] [I] Validation of connection to vCenter server

[2019-05-29 15:30:45.253] [I] Connection to endpoint [vcenter.blackbox.local] completed successfully.

[2019-05-29 15:30:45.262] [I] Validation endpoint compute resource Blackbox

[2019-05-29 15:30:45.294] [I] Compute resource with name [Blackbox] was found in vCenter instance [vcenter.blackbox.local]

[2019-05-29 15:30:45.318] [I] ********************************************************

[2019-05-29 15:30:45.322] [I] Locate Cafe / Infrastrucure Hosts

[2019-05-29 15:30:45.325] [I] ********************************************************

[2019-05-29 15:30:45.581] [I] Cafe host for tenant vsphere.local for user administrator found.

[2019-05-29 15:30:45.585] [I] Cafe host for tenant vsphere.local for user administrator found.

[2019-05-29 15:30:45.588] [I] Cafe host for system tenant created successfully

[2019-05-29 15:30:45.649] [I] Infrastructure host already configured.

[2019-05-29 15:30:45.723] [I] ********************************************************

[2019-05-29 15:30:45.727] [I] Setup tenant

[2019-05-29 15:30:45.733] [I] ********************************************************

[2019-05-29 15:30:45.792] [I] Target tenant vsphere.local

[2019-05-29 15:30:45.811] [I] ********************************************************

[2019-05-29 15:30:45.813] [I] Setup tenant administrator

[2019-05-29 15:30:45.816] [I] ********************************************************

[2019-05-29 15:30:45.868] [E] Error in (Workflow:vSphere Initial Setup / Get Local User (item39)#10) TypeError: Cannot call method "indexOf" of null

[2019-05-29 15:30:45.890] [I] --------------------------------------------------

[2019-05-29 15:30:45.893] [E] Unable to execute step: Setup tenant administrator

[2019-05-29 15:30:45.895] [I] --------------------------------------------------

[2019-05-29 15:30:45.914] [I] Rollback creates entities

[2019-05-29 15:30:45.967] [E] Workflow execution stack:

***

item: 'vSphere Initial Setup/item1', state: 'failed', business state: 'Setup / Locate tenant administrator', exception: 'TypeError: Cannot call method "indexOf" of null (Workflow:vSphere Initial Setup / Get Local User (item39)#10)'

workflow: 'vSphere Initial Setup' (daf78a25-baf7-4e8e-a12a-b7b1b0576795)

|  'attribute': name=errorCode type=string value=TypeError: Cannot call method "indexOf" of null (Workflow:vSphere Initial Setup / Get Local User (item39)#10)

|  'attribute': name=vmTemplateNames type=Array/string value=__NULL__

|  'attribute': name=selectedTemplateNames type=Array/string value=__NULL__

|  'attribute': name=stepName type=string value=Setup tenant administrator

|  'attribute': name=InterfaceTypeId type=string value=vSphere

|  'attribute': name=enterpriseGroupName type=string value=Fabric Group

|  'attribute': name=machinePrefixName type=string value=vm

|  'attribute': name=businessGroupName type=string value=Business Group

|  'attribute': name=reservationName type=string value=Reservation

|  'attribute': name=entitlementName type=string value=Endpoint Provisionig

|  'attribute': name=adminServiceName type=string value=Deployment Infrastructure

|  'attribute': name=machineNumberLength type=number value=2.0

|  'attribute': name=vCenterServerPort type=number value=443.0

|  'attribute': name=vCenterServerPath type=string value=/sdk

|  'attribute': name=entities type=Array/Any value=#{#vCACCAFE:VCACHost#dunes://service.dunes.ch/CustomSDKObject?id='5f975cbd-1cee-4e48-956b-835bfee3d17b'&dunesName='vCACCAFE:VCACHost'#;#vCAC:VCACHost#dunes://service.dunes.ch/CustomSDKObject?id='91000668-5d28-4dd1-84b4-43a7620a5bdd'&dunesName='vCAC:VCACHost'#}#

|  'attribute': name=tenantCafeHost type=vCACCAFE:VCACHost value=__NULL__

|  'attribute': name=iaasHost type=vCAC:VCACHost value=dunes://service.dunes.ch/CustomSDKObject?id='91000668-5d28-4dd1-84b4-43a7620a5bdd'&dunesName='vCAC:VCACHost'

|  'attribute': name=systemTenantCafeHost type=vCACCAFE:VCACHost value=dunes://service.dunes.ch/CustomSDKObject?id='5f975cbd-1cee-4e48-956b-835bfee3d17b'&dunesName='vCACCAFE:VCACHost'

|  'attribute': name=reservationNetworkName type=string value=

|  'attribute': name=reservationStorage type=string value=

|  'attribute': name=resourcePoolName type=string value=

|  'attribute': name=managementEndpointEntity type=vCACCAFE:Endpoint value=__NULL__

|  'attribute': name=connectionTimeout type=number value=60.0

|  'attribute': name=operationTimeout type=number value=60.0

|  'attribute': name=availableStoreNames type=Array/string value=__NULL__

|  'attribute': name=availableResourcePoolNames type=Array/string value=__NULL__

|  'attribute': name=availableNetworkNames type=Array/string value=__NULL__

|  'attribute': name=cafeHosts type=Array/vCACCAFE:VCACHost value=#{#vCACCAFE:VCACHost#dunes://service.dunes.ch/CustomSDKObject?id='5f975cbd-1cee-4e48-956b-835bfee3d17b'&dunesName='vCACCAFE:VCACHost'#;#vCACCAFE:VCACHost#dunes://service.dunes.ch/CustomSDKObject?id='789a623f-65df-4272-8896-886b1f66c9ac'&dunesName='vCACCAFE:VCACHost'#;#vCACCAFE:VCACHost#dunes://service.dunes.ch/CustomSDKObject?id='951dd9f8-cf9a-4b5a-8f26-f2463fedbba6'&dunesName='vCACCAFE:VCACHost'#}#

|  'attribute': name=systemTenantDomain type=string value=vsphere.local

|  'attribute': name=cafeHostHostName type=string value=vra.blackbox.local

|  'attribute': name=systemTenantUserName type=string value=Administrator@vsphere.local

|  'attribute': name=systemTenantName type=string value=vsphere.local

|  'attribute': name=tenantAdminEntity type=Any value=Any#__NULL__

|  'attribute': name=targetTenantName type=string value=vsphere.local

|  'attribute': name=managementEndpointHosts type=Array/vCAC:Entity value=__NULL__

|  'input': name=endPointName type=string value=vCenter

|  'input': name=endPointHost type=string value=vcenter.blackbox.local

|  'input': name=endPointComputeResourceName type=string value=Blackbox

|  'input': name=endPointAdminUserName type=string value=administrator@drwho.org

|  'input': name=endPointAdminPassword type=SecureString value=__NULL__

|  'input': name=newTenantAdminFirstName type=string value=

|  'input': name=newTenantAdminLastName type=string value=

|  'input': name=newTenantAdminUsername type=string value=

|  'input': name=newTenantAdminPassword type=SecureString value=__NULL__

|  'input': name=newTenantAdminEmailAddress type=string value=

|  'input': name=newTenantName type=string value=

|  'input': name=createNewTenant type=boolean value=false

|  'input': name=useCurrentTenant type=boolean value=true

|  'input': name=systemTenantUserPassword type=SecureString value=__NULL__

|  'input': name=dataCollectionTimeOut type=number value=240.0

|  'input': name=existingTenant type=string value=

|  'input': name=existingTenantAdminUsername type=string value=

|  'input': name=existingTenantAdminPassword type=SecureString value=__NULL__

|  'no outputs'

*** End of execution stack.

 

I'm trying to connect to local wifi for internet access and at the same time connect hardwired to local area network that does not have internet access.

I am able to connect to the devices over the lan in windows.

The LAN connects me to some audio matrix devices. I am using a windows programs on the windows side to configure those devices.

The devices I am trying to connect to on the windows side have the following IP address: 192.168.199.x.

The default gateway address is: 192.168.199.1

When i do an ipconfig in windows console, I show 192.168.199.100

However, when the network cable is plugged into my mac, I am unable to get internet access via wifi on the mac side.

As soon as I unplug the network cable, Internet access comes back.

I need to have simultaneous wifi connectivity and LAN connectivity in order to work on this equipment.

I have been able to do this in the past. Not sure why I can't make it work now.

Sorry is this explanation is a little confusing. I hope this is enough information.

That you in advance for your help.

Hi everyone, we are getting ready to deploy instant clones, UEM, and app volumes. We are a k12 environment. Each classroom has different application needs for their desktops. The students visit multiple classrooms a day. I recently realized that app volumes is configured by AD group membership. Is this also how UEM works? I plan on creating app stacks in app volumes for the apps that everyone needs, but not all students need the same applications and some need various ones depending on which class they are in. It's best designed by applying the specific applications and shortcuts to the desktop pool, rather than AD group memberships. Can UEM achieve this? I need to find a solution to allow each classroom (desktop pool) it's own specific applications and shortcuts.

Any advice is appreciated!

Hello there.

I've faced the problem during the vm vMotion from ESXi6.7u1 (10302608) to ESXi 6.5u1 (7388607):

The target host does not support the virtual machine's current hardware requirements.

Use a cluster with Enhanced vMotion Compatibility (EVC) enabled to create a uniform set of CPU features across the cluster, or use per-VM EVC for a consistent set of CPU features for a virtual machine and allow the virtual machine to be moved to a host capable of supporting that set of CPU features. See KB article 1003212 for cluster EVC information.

 

 

com.vmware.vim.vmfeature.cpuid.ibpb

com.vmware.vim.vmfeature.cpuid.ibrs

com.vmware.vim.vmfeature.cpuid.ssbd

com.vmware.vim.vmfeature.cpuid.fcmd

com.vmware.vim.vmfeature.cpuid.stibp

Both hosts are equipped by the same CPUs - E5-2658v4.

It seems that EXi6.7u1 abuse some CPU instructions which are not used by ESXi6.5u1, and this problem VM was powered off and on on ESXi6.7u1, so it got some new instructions (I assume so).

However I couldn't find any info about diffrenece between used CPU instructions in ESXi6.7u1 and ESX6.5u1.

I guess, there is no way to move this VM in powered on state, am I right?

Hello!

  I'm trying to run a powershell script that deletes an entry upon VM disposing. The script runs fine when I run it directly, using the same username/password as what is setup in VRO PSHost:

PS C:\Users\rpcvpshost> D:\steve\remove-dns.ps1 serverName1.as 10.0.0.1 89.10.in-addr.arpa

DNSName is: serverName1.as

DNSServer is: 10.0.0.1

Check for existing DNS record(s) of serverName1.as

Using Get-DnsServerResourceRecord -ZoneName redactedname.com -ComputerName 10.0.0.1 -Node serverName1.as -RRType A -ErrorAction SilentlyContinue

An A-record found to be: DnsServerResourceRecord

IPAddress is: 10.89.28.50

Querying with Get-DnsServerResourceRecord -ZoneName 0.10.in-addr.arpa -ComputerName 10.0.0.1 -Node 50.28 -RRType Ptr -ErrorAction SilentlyContinue

Value of NodePTRRecord is: DnsServerResourceRecord

Remove-DnsServerResourceRecord -ZoneName 0.10.in-addr.arpa -ComputerName 10.0.0.1 -RRtype

PTR -Node 50.28 -RecordData serverName1.as.redactedname.com.  -Force

PTR gone: 50.28

A-record has been removed: serverName1.as

But when I kick-off the same powershell script, I get the following error. I don't believe it's a network issue or permission issue, because I can run the script directly on the PSHost server, with same user/pass, and it works. ** Note, ignore if the IPs don't 100% matchup in the errors pasted here... I just did a quick search-replace so I'm not putting too much personal server information on the web :-)

[2019-05-30 10:24:50.702] [E] (com.vmware.library.powershell/invokeScript) Error in (Dynamic Script Module name : invokeScript#14) PowerShellInvocationError: Errors found while executing script

Microsoft.Management.Infrastructure.CimException: Failed to get the zone information for redactedname.com on server 10.0.0.1.

   at Microsoft.Management.Infrastructure.Internal.Operations.CimAsyncObserverProxyBase`1.ProcessNativeCallback(OperationCallbackProcessingContext callbackProcessingContext, T currentItem, Boolean moreResults, MiResult operationResult, String errorMessage, InstanceHandle errorDetailsHandle)

[2019-05-30 10:24:50.760] [E] Workflow execution stack:

***

item: 'Invoke an external script/item0', state: 'failed', business state: 'null', exception: 'PowerShellInvocationError: Errors found while executing script

Microsoft.Management.Infrastructure.CimException: Failed to get the zone information for redactedname.com on server 10.0.0.1.

To eliminate a malware threat I recently built up a brand new system of Mohave taking the time to reinstall my apps from fresh downloads and dragged important files and folders by hand from my backup. My final piece is to get Fusion working again. So I just upgraded to v.11, downloaded the disk image and installed. I had dragged my working Window's 10 virtual machine in ~/Documents/Virtual Machines. The virtual machine seems to be recognized but trying to launch fusion yields two alerts followed by nothing. i've attached two little screen shots. Any suggestions how to solve this? Thanks!