Installation of ESXi 5.1 Hypervisor fails, cause no network adapters get detected!
Installation stopps at Network configuration, cause no Nic's.
Hardware is branded as VMware compatible.
When I install WinServer 2008R2 as OS, there are any problems,
all Nic's are present and working, also the Team-function for failover and load balancing.
So, Hardware is OK.
Can anybody help me?
Hardware: HP ML350p G8
Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5
Intel® C600 Chipset
Intel® E5-2600 Processor Family
HP 1Gb Ethernet 4-port 331i Adapter
HP ProLiant ML350p Gen8 E5-2630 2P 32GB-R RAM P420i Hot Plug SFF 750W PS ES Server
678237-xx1
Processor
2x Intel® Xeon® E5-2630 (2.30GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5) ProcessorCache Memory
20MB (1 x 20MB) L3
Memory
32GB (4x8GB) PC3L-10600R (DDR3-1333) Registered DIMMS
NOTE: 20 DIMM slots available.
Network Controller
HP 1Gb Ethernet 4-port 331i Adapter
Storage Controller
HP Smart Array P420i/2G FBWC Controller
Hard Drive, Internal Storage
8x Hot plug SFF SAS HDD bays; 2 for OS as Raid-1, 4 for Data as Raid 1+0, 2 HotSpare
HP Half-Height SATA DVD-RW Optical Drive
Power Supply
2x HP 750W Common Slot Platinum Plus Hot Plug Power Supply
Fans
4 hot plug, redundant fans plus louvers
Accessories
USB Keyboard and Mouse ship standard
NOTE: EURO (-421) Models excludes the keyboard.
Management
HP iLO Management Engine (standard)